Products

 Common Flux Thinner is a solvent that is used to thin Water Soluble, No Clean and RMA fluxes in foaming and some spray applications. 
 M8 no clean solder paste is designed for the most demanding high density electronic assemblies. An evolution of the highly successful NC258 platform, M8 brings no clean solder paste to the next level. Developed in combination with T4 and finer mesh leaded and lead-free alloy powders,...
 AIM’s WS488 water soluble solder paste has been designed to wet virtually any solderable electronic surfaces, components, assemblies, and substrates. WS488 offers superior slump resistance, as well as excellent print characteristics and 8+ hours of stencil life. WS488 is compatible with...
 RMA258-15R is a rosin based solder paste that has been developed to offer long pause-to-print capabilities while enhancing fine print definitions. RMA258-15R reduces such defects as voiding and eliminates head-in-pillow. The superior wetting ability of RMA258-15R results in bright, smooth and...
 Epoxy 4089 is a single component, epoxy adhesive used for bonding SMT components to a PWB for double sided reflow or wave solder assembly. Epoxy 4089 has a formulated tolerance to shear-thinning, a dot formation suitable for automated dispense equipment or positive displacement pump systems,...
 FX16 No Clean Flux has been engineered to provide exceptional soldering performance while leaving minimal, electrically safe flux residues, even when unheated. FX16 is ideally formulated for point-to-point selective soldering and palletized wave soldering. FX16 provides...
 RMA 202-25 is a medium solids, mildly activated liquid flux with a solvent rosin activation formulated to provide a post-process flux residue that is both insulating and non-hydroscopic and does not require cleaning. As a mildly activated rosin based flux, RMA 202-25 offers a wide process...
 Epoxy 4044 is a single component, epoxy adhesive used for bonding SMT components to a PWB for double sided reflow or wave solder assembly. Epoxy 4044 has a formulated tolerance to shear-thinning, a dot formation suitable for automated dispense equipment or positive displacement pump systems,...
 One-Step Underfill 688 is a low surface tension, one component epoxy resin designed as a one-step no-flow underfill for flip chip, CSP, BGA and micro-BGA assemblies. One-Step Underfill 688 improves product reliability through high Tg, low CTE, and good fill with no voiding. Even though One-...
 WS482 is a water soluble, halide-free flux cored wire that is highly active and compatible with water soluble solder paste chemistries. WS482 offers improved thermal stability, allowing it to be processed with standard or high temperature alloys. WS482 offers residues that are non-corrosive...
 AIM’s J8 No Clean Jetting Solder Paste is specially formulated for use with jetting equipment providing consistent solder deposits as small as 200μm. J8 is fully compatible with all AIM no clean solder pastes for use in applications where combining jetted paste deposits with printed...
 RMA is a mildly activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints. RMA wire will leave slight to moderate post-process residues that may...
 NC277 Liquid Flux is a water-based VOC-Free flux that has performance and reliability characteristics equal or superior to many alcohol-based fluxes. A medium-solids/residue flux, NC277 has an exceptionally durable and powerful activator system making it ideally suited for high thermal mass...
 Underfill FF35 is a low surface tension, one component epoxy resin designed for use as a capillary flow underfill for flip chip, CSP, BGA and uBGA assemblies. Underfill FF35 offers excellent capillary action for flat, fast and complete spread. Underfill FF35 offers superior reliability...
 WS715M is a neutral alcohol based, organically activated, rosin-free, water soluble liquid flux designed specifically for wave solder applications. Though designed for application via foam fluxer, WS715M may also be applied by automated flux sprayers, dipped, or brushed on with favorable...
 WS716 is a halogen- and halide-free, alcohol based, organically activated, rosin-free, water soluble liquid flux designed specifically for wave solder applications. WS716 is the liquid version of the WS-477S1 series solder paste. Though designed for application via foam fluxer, WS716 may also...
 GLOW CORE solder wire is a lead-free and tin-lead compatible no-clean flux core that offers very good wetting and low residues.  
 WS770 is a PH neutral, organically activated, water-based, VOC-free water-soluble liquid flux formulated to fully atomize during the wave soldering process. WS770 may be applied by automated flux sprayers, foamed, dipped, or brushed on with favorable results. WS770 is a buffered...
 OAJ Cored Wire features a halide-activated system that has been neutralized with an amine. The aminehydrohalide provides a high activation level that produces excellent tarnish or oxide removal, and maximum capillary action, leading to faster wetting, and reducing the chances of thermal...
 The revolutionary activator system in AIM's new NC273LT low temperature solder paste improves the wetting performance of bismuth alloys to RoHS compliant plating and surface finishes, while ensuring long stencil life, excellent transfer efficiencies and minimizes solder balling common to...
 NC257MD solder paste has been specifically designed for the MyData MY500 Jet Printer. Its unique rheological properties were engineered and validated through extensive testing to provide continuous and consistent deposits. 
 IPA-based flux for foaming or spraying applications. 
 NC280 is a low-to-medium solids, no-clean liquid flux formulated to leave minimal post-process residues that are pin testable without cleaning.  NC280 offers an excellent activity level with good performance on bare copper, solder coated and organic coated PWBs, leaving negligible...
 NC217 Gel Flux is designed for touch-up and repair work where the flux may spread away from the heat source.  NC217 Gel Flux is electrically safe even without a thermal profile.  This gel flux dries within one hour of use with or without heat and is tack-free after four hours.
 NC Paste Flux is a no clean tacky/rework flux designed to wet virtually all solderable electronic surfaces, components, assemblies, and substrates. AIM NC Paste Flux may be used for general touch up or rework of printed circuit boards, and for attaching spheres to ball grid array (BGA)...