Products

  CX18 is a no clean flux core wire solder designed to offer excellent soldering results with all alloys and on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer and fast wetting without the need for additional...
 M8 no clean solder paste is designed for the most demanding high density electronic assemblies. An evolution of the highly successful NC258 platform, M8 brings no clean solder paste to the next level. Developed in combination with T4 and finer mesh leaded and lead-free alloy powders,...
 Epoxy 4044 is single part epoxy adhesive used for bonding SMT components to a PWB prior to double sided reflow or wave solder assembly. Epoxy 4044 is formulated to resist shear-thinning and has rapid thermal cure properties. The viscosity and surface tension of Epoxy 4044...
The Best Choice for High Reliability Soldering Applications REL61™ and REL22™ lead-free solder alloys have been developed to meet the demands of an evolving solder market.  Greater durability, lower costs and lower processing temperature are key drivers and AIM...
 FX16 No Clean Flux has been engineered to provide exceptional soldering performance while leaving minimal, electrically safe flux residues, even when unheated. FX16 is ideally formulated for point-to-point selective soldering and palletized wave soldering. FX16 provides...
 AIM’s J8 No Clean Jetting Solder Paste is specially formulated for use with jetting equipment providing consistent solder deposits as small as 200μm. J8 is fully compatible with all AIM no clean solder pastes for use in applications where combining jetted paste deposits with printed...
 SN100C is a lead-free solder alloy that is comprised of tin-copper-nickel + germanium. The properties of SN100C offer an advantage in terms of performance and cost compared to other lead-free alloys. From automotive and aerospace to consumer and telecom, SN100C has a proven history of...
  NC280 is a low-to-medium solids, no-clean liquid flux formulated to leave minimal post-process residues that are pin testable without cleaning.  NC280 offers an excellent activity level with good performance on bare copper, solder coated and organic coated PWBs, leaving...
 One-Step Underfill 688 is a low surface tension, one component epoxy resin designed as a one-step no-flow underfill for flip chip, CSP, BGA and micro-BGA assemblies. One-Step Underfill 688 improves product reliability through high Tg, low CTE, and good fill with no voiding. Even though One-...
  RX18 no clean flux core wire solder was developed to provide excellent soldering results with all alloys and surface finishes. Engineered for robotic soldering, RX18 promotes thermal transfer, fast wetting and rapid solder penetration into plated through holes or surface mount...
 The revolutionary activator system in AIM's new NC273LT low temperature solder paste improves the wetting performance of bismuth alloys to RoHS compliant plating and surface finishes, while ensuring long stencil life, excellent transfer efficiencies and minimizes solder balling common to...
 SAC305 is a lead-free alloy that contains 96.5% tin, 3% silver, and 0.5% copper. This alloy falls under the JEIDA recommendation for lead-free soldering. When used in wave soldering, AIM’s SAC305 bar solder offers far superior fluidity as compared to other alloys and makes of bar,...
 NC217 Gel Flux is designed for touch-up and repair work where the flux may spread away from the heat source.  NC217 Gel Flux is electrically safe even without a thermal profile.  This gel flux dries within one hour of use with or without heat and is tack-free after four hours.
 NC257MD solder paste has been specifically developed for Mycronic Jet Printers. Its unique rheological properties were engineered and validated through extensive testing in collaboration with Mycronic to provide continuous and consistent deposits. NC257MD prolongs ejector...
 OAJ Cored Wire features a halide-activated system that has been neutralized with an amine. The aminehydrohalide provides a high activation level that produces excellent tarnish or oxide removal, and maximum capillary action, leading to faster wetting, and reducing the chances of thermal...
 Sn63/Pb37 Electropure™ is a high purity alloy that is composed of 63% tin and 37% lead. Electropure is alloyed in a proprietary method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solder, thus reducing drossing, improving...
 RMA258-15R is a rosin based solder paste that has been developed to offer long pause-to-print capabilities while enhancing fine print definitions. RMA258-15R reduces such defects as voiding and eliminates head-in-pillow. The superior wetting ability of RMA258-15R results in bright, smooth and...
 RMA is a mildly activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints. RMA wire will leave slight to moderate post-process residues that may...
 RMA 202-25 is a medium solids, mildly activated liquid flux with a solvent rosin activation formulated to provide a post-process flux residue that is both insulating and non-hydroscopic and does not require cleaning. As a mildly activated rosin based flux, RMA 202-25 offers a wide process...
  WS482 is a water soluble, halide-free flux cored wire that is highly active and compatible with water soluble solder paste chemistries. WS482 offers improved thermal stability, allowing it to be processed with standard or high temperature alloys. WS482 offers residues that are non-...
 AIM’s WS488 water soluble solder paste has been designed to wet virtually any solderable electronic surfaces, components, assemblies, and substrates. WS488 offers superior slump resistance, as well as excellent print characteristics and 8+ hours of stencil life. WS488 is compatible with...
 WS715M is a neutral alcohol based, organically activated, rosin-free, water soluble liquid flux designed specifically for wave solder applications. Though designed for application via foam fluxer, WS715M may also be applied by automated flux sprayers, dipped, or brushed on with favorable...
  WS716 is a halogen- and halide-free, alcohol based, organically activated, rosin-free, water soluble liquid flux designed specifically for wave solder applications. WS716 is the liquid version of the WS-477S1 series solder paste. Though designed for application via foam fluxer, WS716...
 WS770 is a PH neutral, organically activated, water-based, VOC-free water-soluble liquid flux formulated to fully atomize during the wave soldering process. WS770 may be applied by automated flux sprayers, foamed, dipped, or brushed on with favorable results. WS770 is a buffered...
 Epoxy 4089 is a single part, epoxy adhesive used for bonding SMT components to a PWB prior to double sided reflow or wave solder assembly. Epoxy 4089 has been formulated for use in all types of high speed dispensing equipment including air pressure, auger valve, piston and...

Pages